Table of friction coefficients: Difference between revisions

Revision as of 22:00, 20 January 2010

First surface	Second surface	Condition	$μ_{s}$	$μ_{k}$	$\tan^{- 1} (μ_{s})$ (radians)	$\tan^{- 1} μ_{s})$ (degrees)	$\tan^{- 1} (μ_{k})$ (radians)	$\tan^{- 1} (μ_{k})$ (degrees)
Aluminimum	Steel	Dry and clean	$0.61$	$0.47$	$0.55$	$31$	$0.44$	$25$
Aluminimum	Aluminimum	Dry and clean	$1.05 - 1.35$	$1.4$	$0.81 - 0.93$	$46 - 53$	$0.95$	$54$
Copper	Steel	Dry and clean	$0.53$	$0.36$	$0.49$	$28$	$0.35$	$20$
Copper	Copper	Dry and clean	$1.0$	?	$0.79$	$45$	?	?
Wood	Wood	Dry and clean	$0.25 - 0.5$	?	$0.24 - 0.46$	$14 - 26$	?	?
Wood	Wood	Wet	$0.2$	?	$0.2$	$11$	?	?

@@ Line 3: / Line 3: @@
 ! First surface !! Second surface !! Condition !! <math>\mu_s</math> !! <math>\mu_k</math> !! <math>\tan^{-1}(\mu_s)</math> (radians) !! <math>\tan^{-1}\mu_s)</math> (degrees) !! <math>\tan^{-1}(\mu_k)</math> (radians) !! <math>\tan^{-1}(\mu_k)</math> (degrees)
 |-
-| Aluminimum || Steel || Dry and clean || <math>0.61</math> || <math>0.47</math> || <math>0.55</math> || <math>31</math>|| <math>0.44</math> || <math>25</math> degrees
+| Aluminimum || Steel || Dry and clean || <math>0.61</math> || <math>0.47</math> || <math>0.55</math> || <math>31</math>|| <math>0.44</math> || <math>25</math>
 |-
 | Aluminimum || Aluminimum || Dry and clean || <math>1.05 - 1.35</math> || <math>1.4</math> || <math>0.81 - 0.93</math> || <math>46 - 53</math> || <math>0.95</math> || <math>54</math>
 |-
-| Copper || Steel || Dry and clean || <math>0.53</math> || <math>0.36</math> || <math>0.49</math> || <math>28</math>|| <math>0.35</math> || <math>20</math> =
+| Copper || Steel || Dry and clean || <math>0.53</math> || <math>0.36</math> || <math>0.49</math> || <math>28</math>|| <math>0.35</math> || <math>20</math>
 |-
 | Copper || Copper || Dry and clean|| <math>1.0</math> || ? || <math>0.79</math> || <math>45</math> || ? || ?